- SULU, H.T1, Ibrahim A.S2, Tanimu Y3 & Abdulmuminu M3
- DOI: 10.5281/zenodo.24412863
- SSR Journal of Engineering and Technology (SSRJET)
The hot-dry climate of Sokoto Metropolis demands building
materials that can minimize indoor heat gain. This study assessed the thermal
conductivity of four commonly used ceiling materials: Plywood, plaster of Paris
(POP), suspended mineral fiber ceiling and Asbestos cement board. Samples were
obtained from major markets in Sokoto and tested under standard Laboratory
conditions to determine their thermal conductivity, density and thickness.
Results revealed that plywood had the lowest thermal conductivity followed by
suspended ceiling, POP and asbestos cement board with the highest value. The
finding indicate plywood and suspended ceiling boards offer better thermal
insulation and are more suitable for reducing indoor temperatures and cooling
energy demand in Sokoto. It is recommended that these materials be prioritized
in building design, while the use of asbestos should be discouraged due to high
conductivity and health risk. Enhancing POP ceiling with insulation is also
advised for improved thermal performance.
Keywords: Thermal conductivity, ceiling materials,
indoor comfort, Sokoto, Energy efficiency.

